High-precision Numerical Control Frequency to Voltage Module 0-1KHz Frequency is Converted into 0-10V Voltage

Product selling point:

1. Using high-quality materials, the quality is guaranteed

2. This module can convert the frequency pulse signal into an analog voltage signal

3. It can convert 0-1KHz frequency signal into 0-10V voltage output

4. Small and beautiful appearance

5. Wide application

Wiring Instructions:

VCC: working power

GND: power ground

IN+: Input voltage

IN one: input ground

OCOUT: signal collector output port (use this output port when matching the driver)

FOUT: frequency output port (general frequency output port)

Two independent outputs, OC-OUT is NPN, FREQ-OUT is IC output. The common cathode is used with the negative GND of the power supply. When the common anode is connected, it is used with the power supply. When the common anode is connected with 13-24v power supply, a 2.7KR resistor must be connected in series; when the common anode is connected with 12v power supply, it must be String a 33OR resistor.

Instructions:

Connect the positive and negative poles of the 0-10V voltage signal to IN+ and N- respectively, and there is a corresponding frequency signal output between FOUT and GND.

Correspondence between input and output:

1V = 1KHz

10V = 10KHz

If there is a deviation in the corresponding relationship during use, you can adjust the potentiometer on the board to calibrate.

Package Included:

Module*1