Description

DC 5V-9V DIY Kit Infrared Distance Sensor Indicator Reversing Radar Ranging Warning SMD DIP Electronic Welding Practice Suite

Type A:

Description:

The infrared reversing radar is composed of a multi-resonant circuit, an infrared signal transmitting and receiving circuit, an infrared signal amplifying and a voltage comparison circuit, and has the characteristics of simple circuit, low cost and stable circuit operation, and is widely used in various ranging occasions.

Parameter:

Work voltage:DC 5V-9V

Principle:

The infrared transmitting tube HF and the infrared receiving tube HJ have polarity (long legs are positive), please do not install the wrong ones, the mounting direction can be upwards or sideways. RP1 adjusts the reflection distance, RP2 adjusts the sensitivity, LED3 can be bright when the distance is 30cm, LED2 and LED3 are bright when the distance is 20cm, and fully bright when the distance is 10cm.

The time base circuit NE555 and surrounding components form a multivibrator to generate an infrared wave signal, which is output through the third pin of IC2 and drives the infrared transmitting tube HF to emit an infrared signal.

Introduction:

The infrared radiation warning/infrared parking radar ranging has the characteristics of simple circuit structure, low cost and stable circuit operation, and is widely used in various ranging applications. The circuit uses an infrared transmitting tube and an infrared receiving tube as sensor elements. The core components of the circuit include the NE555 and the op amp LM324. The NE555 constitutes a multivibrator oscillator circuit to emit infrared signals. The LM324 is mainly used to amplify the infrared receiving signal and constitute a voltage comparator. The LED is used to indicate the range of the reverse distance.

Type B:

Description:

The infrared reversing radar is composed of a multi-resonant circuit, an infrared signal transmitting and receiving circuit, an infrared signal amplifying and a voltage comparison circuit, and has the characteristics of simple circuit, low cost and stable circuit operation, and is widely used in various ranging occasions.

Parameter:

Work voltage:DC 9V

Principle description:

1>.The infrared transmitting tube HF and the infrared receiving tube HJ have polarity (long legs are positive), please do not install the wrong ones, the mounting direction can be upwards or sideways. RP1 adjusts the reflection distance, RP2 adjusts the sensitivity, LED3 can be bright when the distance is 30cm, LED2 and LED3 are bright when the distance is 20cm, and fully bright when the distance is 10cm. It is better to use a white paper to block the reflection above the infrared sensor.

2>.The time base circuit NE555 and surrounding components form a multivibrator to generate an infrared wave signal, which is output through the third pin of IC2 and drives the infrared transmitting tube HF to emit an infrared signal.

Installation Notes:

1>.The infrared emission tube (HFS) and the infrared receiving tube (HS) have polarity, and the polarity direction is determined before installation.

The mounting direction can be either upward or sideways.

2>.The light-emitting diode and diode 1N4148 have polarity, and the polarity direction is determined before installation.

3>.The integrated block is soldered to the base first, and the polarity direction is paid attention to when installing the chip.

4>.The circuit has no power polarity protection. Before the power is turned on, the positive and negative poles are determined.

5>.Rp1 adjusts the reflection distance, Rp2 adjusts the sensitivity, you can try 30cm one light, 20cm two lights, 10cm three lights. The top of the sensor is covered with white paper, which has the best reflection on infrared waves.